Bender

$849.00 AUD

The Bender was originally designed as a small wave performance board but we have found it goes well in most conditions, especially on a flatter faced wave. If you’re after a fast board with a lot of hold, the Bender is your board.

or 4 payments of $212.25 AUD with

Category: Tag:

OVERVIEW

The Bender was originally designed as a small wave performance board but we have found it goes well in most conditions, especially on a flatter faced wave. If you’re after a fast board with a lot of hold, the Bender is your board.

The Bender has a flatter entry rocker which helps with paddling and down the line speed off the front foot. The tail rocker is slightly flatter then the shredder but has more tail flip from the last 8 inches of the board, giving the board more ‘pop’ and release through turns. The Benders overall volume had been shifted forward allowing you to generate more speed and drive from the front foot. Being thinner in the tail, it increases board sensitivity under the back foot.

The Benders wide point is slightly further forward then our other performance models to give you instant speed and drive off your front foot. With this we have incorporated a slight hip around the front fins to give the board a tighter turning radius and feel looser through turns. The rails are a little fuller and soft for a nice forgiving feel. The Bender is such a fun and easy board to ride, that once your’e on a Bender, you won’t want to get off it.

Ride your bender 1-2 inches shorter and 1/4inch wider then your normal board.

FEATURES

  • Low entry rocker
  • High tail rocker
  • Single to double concave

0 – 4 ft

CODELENGTHWIDTHTHICKNESSVOLUME (LTS)
BYRBEN575'718 1/2 2 3/1623.5 LTS
BYRBEN585'818 5/82 1/424.7 LTS
BYRBEN595'918 3/42 5/1626 LTS
BYRBEN5105'1018 7/82 3/827.2 LTS
BYRBEN5115'11192 3/827.8 LTS
BYRBEN511B5'1119 1/8 2 7/1628.65 LTS
BYRBEN606'019 1/82 7/1629.05 LTS
BYRBEN60B6'019 1/42 1/229.9 LTS
BYRBEN616'119 1/42 1/230.35 LTS
BYRBEN61B6'1 19 3/82 9/1631.3 LTS
BYRBEN626'219 1/22 9/1632.05 LTS
BYRBEN636'319 5/82 5/833.4 LTS
BYRBEN646'419 3/42 3/435.5 LTS
BYRBEN656'520 2 7/838.05 LTS

ORDER FORM

Reviews +

Reviews

There are no reviews yet.

Be the first to review “Bender”

Your email address will not be published. Required fields are marked *